The Twin Trim Modulation System is a
new product that will completely revolutionize the multi-engine boating
experience. With a simple yet intuitive new interface, operators now have a
degree of control that was previously impossible to achieve.
The core behind the Twin Trim system is a custom designed module that interfaces
with the existing factory trim switches in the binnacle. The module reroutes
individual switch input from the operator to multiple engines or trim tabs,
allowing a higher degree of control over pitch and roll.
Bow Adjustment (pitch)
| Port trim switch up | Port trim switch down |
|
|
|
| Port and starboard surface’s trim up | Port and starboard surface’s trim down |
Port Starboard list (roll)
| Roll to Port - Starboard Switch down | Roll to Starboard - Starboard Switch up |
|
|
|
| Port motor up, Starboard motor down | Port motor down, Starboard motor up |
Twin Trim can control as many engines as needed and sums there inputs into bow
up/down, and roll left/right. These four basic motions can now be exploited to
the fullest extent the hull design allows with a user friendly feel.
Gone are the days of looking over
your shoulder at your hoods, or relying on inaccurate and slow trim gauges. You
can now find the sweet spot in your hull and truly trim (balance) the boat with
small variations around that area.
No more will you yell at the big guy
to sit in the middle and stop wandering around =)
Twin Trim dramatically reduces cornering distance and allows the operator an
intuitive way to “hook up” the boat quickly.
With the addition of our joystick
control, the system is made one level easier. Hull pitch and roll are directly
proportional to the input of the 4 way joystick.
If you have 2 motors and 2 tabs with
conventional controls there are 64 possible trim input configurations.
With Twin Trim you have 2 choices, TABS OR DRIVES, the correction you input will be attained in the fastest manner possible as you will always be trimming all of the surfaces in that group most efficiently. If you trim to far, the correction is immediate by reversing the switch.
